Cafe Racer Timelapse build - Yamaha XJ 600 (FJ 600)

3 Jun 2018
2 208 120 Ditonton

Here is the timelapse build of my third cafe racer project : a 1984 Yamaha FJ 600 (or XJ 600 in Europe)
I chose a more difficult motorcycle this time as the XJ 600 is known not to ben easiest one to transform.
If you want to support me you can get one of my original tshirt from my store : shop.spreadshirt.com/tom-racing-designs

Please vote to tell me which bike is your favorite: tomracingdesigns.com/index.php/2018/06/04/vote-for-your-favorite-bike/
To learn more about my builds, check out my website :
tomracingdesigns.com
All rights reserved, no repost without permission.
Music by Joakim Karud idworlds.info

Komentar
  • est ce homolgué pour la route ??

    SamyYTPSamyYTP8 hari yang lalu
  • Wery nice bike, and you got the right sound as well !

    Jan HedströmJan Hedström10 hari yang lalu
  • She's a beaut'.

    Monty CampbellMonty Campbell15 hari yang lalu
  • Beau travail !petite question c'est quoi comme silencieux ?

    Clark Kent 👓Clark Kent 👓16 hari yang lalu
  • Very good job but, the video its too fast man I cant

    Dos En AxisDos En Axis17 hari yang lalu
  • So noone is gonna mention the Maserati in the background??? xD This man has to make quite a lot of money. Thats prob why he has so many cafe racers xD Still an amazing piece of are he created :D

    Ju5t1nJu5t1n21 hari yang lalu
  • but is it the "diversion" model? i don't understand! by the way, good job!!

    Fabrix GuevaraFabrix Guevara22 hari yang lalu
  • Does someone know what did he use to remove the oxide from the tank?

    Yeray MartinezYeray Martinez23 hari yang lalu
  • Vet gedaan! inspiratie :p

    Carl BosmanCarl Bosman24 hari yang lalu
  • Should've done something with the tank!

    BradLee JonesBradLee Jones24 hari yang lalu
  • Cambiarlo los aros y va estar brutal

    N*18 Limachi Yujra Jhon Brando 4to BN*18 Limachi Yujra Jhon Brando 4to B26 hari yang lalu
  • задние поворотники поставил неудачно, надписи каферейсер излишни, в остальном нормалды

    VoronVoron28 hari yang lalu
  • 13:44 look at that goof on the right hahahahha

    m 88m 8828 hari yang lalu
  • who else watches his vdos jus for music.. thi is lofi for me at work

    Ramen SayamiRamen Sayami28 hari yang lalu
  • Looks great and sounds great :D

    LuftbubblanLuftbubblanBulan Yang lalu
  • concentrated knowledge in 15 minutes

    Vasilis ManatosVasilis ManatosBulan Yang lalu
  • Another well done build. XJs are so cool!

    AceCafeBikesAceCafeBikesBulan Yang lalu
  • Awesome!!!

    jomamu30jomamu30Bulan Yang lalu
  • Muy buen trabajo, solo te aconsejaria recortar el forro de la guaya de clutch porque esta demasiado largo

    Marcos BoadasMarcos BoadasBulan Yang lalu
  • idworlds.info/from/2LGfoqquqquKe9E/video посмотрите видос братва. НОРМАЛЬНАЯ ТЕМА

    MotoLife МоскваMotoLife МоскваBulan Yang lalu
  • I love it. The bike is great, all the more because your work area is so sad. The hand tools are difficult, but determination shows and you did not give up. I applaud you Sir.

    Andrew DavisAndrew DavisBulan Yang lalu
  • WISH I WAS SHORTER RN

    hD6KmMfotemZDrEhD6KmMfotemZDrEBulan Yang lalu
  • プロって凄いし自分だけのオリジナルバイク作れちゃうとか羨ましい

    buu chanbuu chanBulan Yang lalu
  • Can u tell me which exhaust is it??

    Amey men's parlour the barber shopAmey men's parlour the barber shop2 bulan yang lalu
  • Can you make money doing this??

    daniel iversendaniel iversen2 bulan yang lalu
  • belle transformation

    david da silva santosdavid da silva santos2 bulan yang lalu
  • Very good work!✌😁 Paint tank with matt gold ....😍

    Andrea R6Andrea R62 bulan yang lalu
  • Those OG wheels on the XJ600 are beautiful! nice build!

    efil4saagginefil4saaggin2 bulan yang lalu
  • Nice job, you have taken a vastly underrated bike and turned it into a thing of beauty well done. So many guys just go out and buy that look, most companies make something along those lines trying to catch the hipsters and sting them for a fortune, when they could get into something no one else has for less than half the cost of the new one. Hope the bike gives you years of pleasure.

    Nick WilliamsNick Williams2 bulan yang lalu
  • Amazing work, very well done !!

    Camarc64 Camarc64Camarc64 Camarc642 bulan yang lalu
  • where i found this brake lights led?

    Saulo RobertoSaulo Roberto2 bulan yang lalu
  • Alguien más ve este video sin tener una moto

    Cristofer RiveraCristofer Rivera2 bulan yang lalu
  • where can i get the same exhaust tips you used

    Nick GeorgeNick George2 bulan yang lalu
  • For around town traffic you can't beat a cafe racer, Sweet job!

    LikeitornotbutLikeitornotbut2 bulan yang lalu
  • Whole design is amazing. But headlight is killing the looks. My suggestion is to lower the position of headlight. Use full led. Thanks.

    Nitin GuptaNitin Gupta2 bulan yang lalu
  • I have the 84 FJ1100 never ridden it I’m having it fully rebuilt before I even try to ride it

    That guy BrianThat guy Brian2 bulan yang lalu
  • Brillant job, I’ve got this same model, can You give me some support in transformation? My email is michal@jarma.com.pl. Thank You Merci.

    jarmadecorjarmadecor2 bulan yang lalu
  • Two things, don’t dump fuel on the ground and don’t rinse contaminates into the water supply.

    wtbofncwtbofnc2 bulan yang lalu
  • This guy really deserves a workshop .....

    Kismet Bike WorksKismet Bike Works3 bulan yang lalu
  • Well done. Beautiful

    James PayneJames Payne3 bulan yang lalu
  • Zil-130 V8 sound))))

    Сергей КузьминСергей Кузьмин3 bulan yang lalu
  • You should have welded the cut off frame ends with steel caps. Leaving the frame exposed like that is invitation for rust. You do not need water to go in there for it to rust. Atmospheric moisture would do the job.

    Ram Mohan GRam Mohan G4 bulan yang lalu
  • 凄くカッコいい!

    Tomo MTomo M4 bulan yang lalu
  • Can a backrider fit in that beast?

    Cats CatsCats Cats4 bulan yang lalu
  • Awesome build and I couldn't help but laugh at the life support temporary fuel line and bottle to test the engine. That was a really smart idea to keep the project going 💪👍

    TexTex5 bulan yang lalu
  • Fajny ale opony na szersze felgi szprychowe i lusterka w kierownicy by byly ładniejsze

    luciano 81luciano 815 bulan yang lalu
  • I wanna see a lowered cafe racer pleaseee😅

    Wan Jerry ErieWan Jerry Erie5 bulan yang lalu
  • You gotta get a workbench, working off the ground is a young mans game!

    mininggpu coinmininggpu coin5 bulan yang lalu
  • Elle est superbe ta modif mec, mais clairement tes clignotants arrières doivent être reculés.

    M LBM LB5 bulan yang lalu
  • There is something you should know about this particular model. It can't tolerate moving the forks up in the triples, it will cause a high speed wobble and cause a crash. This is a documented condition with this model, I'm dead serious. The clip-ons would have to go under the top triple and keep the tubes at stock height. Or create a tube bar clamp setup to go in the bolt holes for the original bars and leave the tubes at stock height. I'm completely serious. I was a shop foreman for a Yamaha dealer when these were new and Yamaha had special safety bulletins about it AND we had customers crash their bikes after doing it.

    jameshisselfjameshisself5 bulan yang lalu
  • Despite mods were minor the overall effect is amazing. I had FJ600 with plans to change it into CR but that didn't work out - thank to you I can see how amazing It might look.

    Lukasz PrasalLukasz Prasal5 bulan yang lalu
  • Great video mate, she looks awesome. a wee tip for you see you carb balancers get you self four wee adjustable inline screw valves and when the bike is running you can close them down to smooth the needles right out, it works a treat and you will get a far more accurate reading. Lovely bike though Sir.

    GinjaGinja5 bulan yang lalu
    • That balancer set usually comes with the damping valves, or at least mine did.

      SR7 JudoSR7 JudoBulan Yang lalu
  • What is tour exhaust ? Where have you find ?

    CAROLUS MAGNUSCAROLUS MAGNUS5 bulan yang lalu
  • Great job! Beautiful & cool!

    mickrick84mickrick845 bulan yang lalu
  • Cost?

    adis adisadis adis5 bulan yang lalu
  • Motul for the win 👌

    Daniel KnightDaniel Knight6 bulan yang lalu
  • well done dude!!! i am currently modifying an xj600 from 1984. it's been quite complicated, but your video gave me a lot of inspiration now. amazing work!!!

    Daniel BerggrenDaniel Berggren6 bulan yang lalu
  • tandem steps ?

    alkoop100alkoop1006 bulan yang lalu
  • Nothing was "built". Just chopped parts off, did a thorough cleaning, and bolted on some stuff you bought.

    Leon BonnoLeon Bonno6 bulan yang lalu
  • Amazing cool looking bike 🙌🏼🙌🏼 I wish I had the skills to do this on my own XJ600

    Christian RohdeChristian Rohde6 bulan yang lalu
  • Beautiful , good jod

    anthony Derohananthony Derohan6 bulan yang lalu
  • Good, very good. It’s really priceless job.wish you all the best (from Bangladesh).love you brother, and love your extreme jobs.

    Gorainodi GorainodiGorainodi Gorainodi6 bulan yang lalu
  • オマンコ野郎ども

    ハナモゲラ親父ハナモゲラ親父6 bulan yang lalu
  • How did you start learning about Motocycles? Did you do a training or just teached yourself? And if so, how can i start?

    ImFyreImFyre6 bulan yang lalu
  • I have a question What is the total cost of customizing a motorcycle in this way?

    Angel cruzAngel cruz6 bulan yang lalu
  • What was the Motul additive that you put in the gas tank? Thanks

    gosoku2gosoku26 bulan yang lalu
  • Great job , love these old Yamaha's, Maybe get some restrictors for your vacuum gauges 😁 Great videos 👍

    My Turkish LifeMy Turkish Life6 bulan yang lalu
  • bro can u say where is ur garage plz

    Senthilmurugan MahalingamSenthilmurugan Mahalingam7 bulan yang lalu
  • Nice.. i love it... 😍

    Sanjay JayaprakashSanjay Jayaprakash7 bulan yang lalu
  • 🏍👏👍

    Roman KRoman K7 bulan yang lalu
  • классно , но в нашем царстве-государстве хуй бы прошел тех.осмотр

    FR 22FR 227 bulan yang lalu
  • Dream bike for me😍

    Mulla Aliasghar MaimoonMulla Aliasghar Maimoon7 bulan yang lalu
  • i really surprised when you use bath tub to cleaning the Tank ...but its cool bro

    aime gobelaime gobel7 bulan yang lalu
  • Аuthor disfigured a good old classic motorcycle. he didnt any work on the engine, only the appearance. the clutch cable is loose... I don't understand this. I'll never understand this style.

    Mrak2kMrak2k7 bulan yang lalu
    • @Monsieur J I do not know. ) IDworlds recommended this video )))

      Mrak2kMrak2k7 bulan yang lalu
    • then why are you here ..?

      Monsieur JMonsieur J7 bulan yang lalu
  • I thought I was the only one to wash motorcycle parts in the bath

    adam tothadam toth7 bulan yang lalu
  • I enjoyed that.. worth watching 😍

    Jc PJc P7 bulan yang lalu
  • Most important of all - SOUNDS FANTASTIC! Almost as good as my 67 Triumph Daytona.

    John M'Boro DicksonJohn M'Boro Dickson7 bulan yang lalu
  • Buen vídeo, felicitaciones!

    S BS B7 bulan yang lalu
  • *I got 23 seconds into the video and had to stop it before I shot myself because of the horrible music..!!*

    upfreaksupfreaks7 bulan yang lalu
  • Just bought one of these, same color too! Can't wait to start building it

    DoctortheeDoctorthee7 bulan yang lalu
  • Класс 👍👍👍

    Валерий ВалерьевичВалерий Валерьевич7 bulan yang lalu
  • Cool!!

    idritopidritop7 bulan yang lalu
  • баллончик поверх порошка , в котором еще и сверлил и наждачкой чистил ? крыльев нет , карбы начищены а двигатель в окислах , зато ленты нахерачил и прямоток воткнул - типичный билдер ради билда . хотя признаю - руки есть.

    Dark FoxDark Fox7 bulan yang lalu
  • Great work, and a fine bike ... i really like your channel !! Carry on ..

    Erik1970VikingErik1970Viking7 bulan yang lalu
  • nice & clean work man!! great job!!

    yvon felleryvon feller7 bulan yang lalu
  • Pipe wraps a waste of time and they stink like hell

    Our Wicked World addict radioOur Wicked World addict radio7 bulan yang lalu
  • Would be good if you slowed it down enough so we can see what you're actually doing rather than this roadrunner speed resto that looks like a cartoon.

    Our Wicked World addict radioOur Wicked World addict radio7 bulan yang lalu
  • very cool! bat、why reverse build in tire rotation…?

    よんげるkansaiよんげるkansai7 bulan yang lalu
  • Please watch........... idworlds.info/from/lsl6grrSpqeGl68/video

    Harry larryHarry larry7 bulan yang lalu
  • Страхотна моторетка.

    joro353joro3537 bulan yang lalu
  • The cafe racing motorbike looks cool and beautiful

    Restoration & DiyRestoration & Diy7 bulan yang lalu
  • Hermosa.

    Motero75Motero757 bulan yang lalu
  • Everything is perfect, except the siting position like on toilet...

    TOMAS B.TOMAS B.7 bulan yang lalu
  • Будет теперь еще один придурок гонять по городу на бессмысленной перделке.

    ИванИван7 bulan yang lalu
  • Anyone could have achieved an equally good lookin result by changing the tank and the wheels. You managed to pull it off by keeping the originals and that was your true success!

    77folgore77folgore7 bulan yang lalu
  • I would love to see a ntv 650 build :)

    M. M.M. M.8 bulan yang lalu
  • Nice bike man. I have a sister bike

    Muntu DanMuntu Dan8 bulan yang lalu
  • Always love that LA vibe background music

    Isaac calebIsaac caleb8 bulan yang lalu
  • g very good job

    Marc 76Marc 768 bulan yang lalu
  • In the 80s I did this to my bike in the kitchen.

    Fawn ComixFawn Comix8 bulan yang lalu
IDworlds